Brand Jtron
Model 03100412
Quantity 1
Color Black
Material Plastic
Specification Operating voltage: DC 4.5~30V; Measure voltage: DC 0~100V; Minimum resolution(V): 0.1V; Measure current: 100A (Shunt resistor needed (100A/75mV)); Minimum resolution(A): 0.01A; Operating current: <20mA; Display: 0.28" LED 3-digital tube; Display color: Red and Blue (two-color display); Dimensions: 48 x 29 x 21mm; Mounting cutout: 45.5 x 26.5mm; Refresh rate: about 500mS / times; Measure accuracy: 1% (+/- 1 digit); Operating temperature: -10C~65C; Operating Humidity: 10%~80% (non-condensing); Working pressure: 80~106 kPa
Features Wiring: Black line (thin): vacant or buck circuit (module) negative; Red line (thin): power supply+; Black line (thick): COM, common measuring; Red line (thick): PW+, measuring terminal voltage input positive; Yellow line (thick): IN+, current input+; (Please refer to the wiring diagrams for more details); Notice: The voltage between the thin red and thin black lines must be within DC 4.5~30V; The ammeter can only be connected to the negative of the device under test; 10A below ammeter (include 10A), built-in shunt, does not require external shunt; When the black thin line vacant, it is better to use insulating tape around the exposed part of the wire, to prevent short circuits; If just be used as a voltmeter, it is recommended that the yellow line and the black line were connected together, to prevent the ammeter digital flashing
Application DIY projects; Suitable for automotive / electric cars / motorcycles battery monitoring or other products voltage current measurement
English Manual/Spec Yes
Other Dual LED: Red voltage, Blue current, Display Voltage Current at same time; This panel meter is common ground design, it means that the (measure ground wire) and (power supply ground) is common ground. Power Supply DC 4.5~30V. With reverse polarity protection, but the max power supply can not exceed DC 30V. Wire Connection, please check the description pictures. Power supply (two line socket): Red wire: Power Supply +; Black wire: Power Supply -; The power supply voltage can not exceed 30V; Measure Port (three line socket); COM: Black wire, measure common ground; PW+: Red wire, Measure Voltage +, IN+, Yellow wire, Measure current input. if use the voltmeter function only, please connect the Yellow wire and black wire together to avoid the Interference
Packing List 1 x Digital volt ampere meter (12cm-cable)
-------------------------------------------------------
類似の電圧電流計の解説
YB27VA 100A Digital Ammeter Voltmeter 2-in-1 0-100V DC Volt Voltage Ampere Meter Red/Blue LED Dual Color Display
ただしこちらは微調整の半固定ボリュームが付いている
Features:
あなたもジンドゥーで無料ホームページを。 無料新規登録は https://jp.jimdo.com から